CS Granite/Limestone/Basalt/Quartz/Cobblestone/Cone Crushing Machine From Mining Equipment Manufacture Facoty

• Customization: Available
• Type: Cone Crusher
• Motor Type: Stepper Motor
• Model NO.: CS
• Motor Power: Deoonds on The Machine Mode
• Application: Mine
• Materials: Coke
• Outlet Size: Adjustable
• Inlet Size: Adjustable
• Condition: New
• Dimension: Customized
• Capacity: 0.05~250 Tph
• After-Sales Service: Engineers Available Overseas
• Installation: Engineer Guide
• Price: Negotiation
• Material: Stainless Steel
• Transport Package: Polywood and Steel Frame
• Specification: stainless steel
• Trademark: BAITE
• Origin: China
• HS Code: 84741000
• Production Capacity: 10000

Product Description

Introduction:
The cs spring cone crusher from special manufacturer is widely used in the fields of metallurgy, construction, hydroelectric project, transport, chemical industries and building materials for crushing all sorts of hard and above medium hard ores and rocks
Cone crusher consist of frame, transmission device, hollow eccentric shaft, bowl-shaped bearing, crushing cone, springs and hydraulic pressure station for adjusting discharge opening.During operation, the motor drives the eccentric shaft shell to turn around through ahorizontal axle and a pair of bevel gear. The axle of crushing cone swings with the force of eccentric shaft shell so that the surface of the crushing wall is close to the roll mortar wall from time to time.
Feature:
--Cone crusher has high design and manufacture quality long service life convenient repairing , lower cost . All of the maintenance work can be done easily on the top of the machine .
--New generation high performance cone with advantages of high capacity, cubicproduct shape high yield with desired fines
--Equipped with fully hydraulic system.Therefore operation is very easy; especiallytramp iron release is very quick and sensitive
--Cone crushers with different chambers are available, to meet our customers' requirements.
--As the overload protection device, spring safety device allows foreign matter and iron pieces to pass through the crushing chamber without jeopardizing machines.

Technical Parameters

NO.	Model	Dia of cone   (mm)	Cavity	Feed opening size (mm)		Output size (mm)	Mainshaft  rotation  speed (r/min)	Driving Power (kw)	Capacity  (t/h)	Weigh (kg)	Appearance  size (mm)
				Closing size	Opening size
1	CSB75	900 (3)	Fine	83	102	9-22	580	75	45-91	15	2821×1880×2164
2			Coarse	159	175	13-38			59-163
3	CSB110	1200   (4)	Fine	127	131	9-31	485	110	63-188	20	2821×1974×2651
4			Mediun	156	156	13-38			100-200
5			Coarse	178	191	19-51			141-308
6	CSB160	1295    (41/4)	Fine	109	137	13-31	485	160	109-181	27	2800×2342×2668
7			Mediun	188	210	16-38			132-253
8			Coarse	216	241	19-51			172-349
9	CSB220	1650  (51/2)	Fine	188	209	16-38	485	220	181-327	55	3911×2870×3771
10			Mediun	213	241	22-51			258-417
11			Coarse	241	268	25-64			299-635
12	CSB315	2134  (7)	Fine	253	278	19-38	435	315	381-726	110	4613×3251×4732
13			Mediun	303	334	25-51			608-998
14			Coarse	334	369	31-64			789-1270

FAQ
Q: Are you a factory ? 
A:Yes,we are factory, which was established in 2006.
We focus on providing expert service including design, manufacture, installation & maintenance for the logistic industries & warehouse equipment.
Q: Terms of Payment:
A:30% of the total amount by TT as deposit, the balance to be paid by TT or L/C at sight before the machines leaving seller' factory.
100% irrevocable L/C at sight.
 Q:Time for preparation of goods:
A:The above machines shall be ready for delivery during 45 days from the date of receiving the deposit/LC, excluding the time of waiting for shipment. If there is any delay of delivery caused by seller, 3‰ of the total amount shall be paid to buyer each day, but this amount shall not exceed the amount of deposit; if the delay is caused by buyer, 3‰ of the total amount shall be paid to seller each day, but this amount shall not exceed 10% of total value of machines.       
 Q:Guarantee period:
   A:The guarantee period for the above machines is twelve months from the date of putting into use, but not exceeds twenty-four months after the machines leaving seller's factory. It is not applicable for quick wear parts.
Q: May I know the status of my order?
A: Yes. We will send you information and photos at different production stage of your order. Every step will be send to you in time.
Q: Can I customize shelving or racking at my own size?
  A: Sure.
Q: If i need the complete mineral processing line. is Baite able to help us build it?

A: Yes, we can help you combine a complete mineral processing line. and give you related professional advice as long as you need.
There is a rich experience engineer team of us. we had already build many mining projects in China & Overseas. You can believe our quality and service. 

Why Choose us?
1.Pre-sale services: enthusiasm
We provide you with the prophase plan, process flow design and manufacturer equipment according to your special demand.
2.one-year warranty to make sure your machine runs consistently.
We always offering lifelong services and provide spare parts for a long term,and repair main parts under right using for free in two years.
3.Technical services
3.1 Design of production line and solutions according to buyer's requirement.
3.2 In 7 days after the receipt of deposit, the seller shall provide related technical documents for equipment installation, in addition to those with special requirements.
3.3 Before delivery, the seller can modify the previous solutions according to buyer's requirement.   
4.After-sales service
4.1 During the installation and commissioning, the seller shall send technician to the site for instruction of installation and commissioning, and for training of workers.
4.2 If there is any equipment failure caused by the buyer, the seller shall assist the maintenance of machines and replacement of fittings, and charges appropriate fees.
4.3 Beyond the guarantee period, the seller can provide services and fittings at a most preferential price. 
4.4The seller can provide consultation and inspection services freely for other products, especially for the up-stream and down-stream products of our equipment.  

6.Work Shop View: