2pg Double Teeth Roller Crusher/ Stone Crusher for Gold Mine/Crushing Aggregate/ Rock/ Stone,

• Customization: Available
• Type: Roll Crusher
• Motor Type: AC Motor
• Model NO.: 2PG
• Motor Power: According to The Crusher Mode
• Application: Mine
• Materials: Coal
• Outlet Size: Optional
• Inlet Size: Optional
• Condition: New
• Dimension: Customized
• Capacity: 0.05~250 Tph
• After-Sales Service: Engineers Available Overseas
• Price: Negotiation
• Installation: Engineer Guide
• Material: Stainless Steel
• Transport Package: Polywood and Steel Frame
• Specification: stainless steel
• Trademark: BAITE
• Origin: China
• HS Code: 84741000
• Production Capacity: 10000

Product Description

Introduction
Double roller crusher is suitable for such solid materials that compression strength less than 300Mpa, moisture less than 35 %, and usually for fine and intermediate crushing. It can be widely used in mining , thermal power , cement, ceramics , metallurgy, chemical industry, building materials industry. Features: low maintenance ratio, reliable performance , low dust, low noise .
    Double roller crusher is configured with two crushing rollers , according to the granularity user needs, the roll surface is divided into two forms: flat surface and welding roller surface, heavier models can be selected if the compressive strength of the material is more than 200Mpa .
    Flat roller surface models is suitable for the following technical requirements: feed size less than 80mm, finished size 0.5-10mm . Such as the use of pebbles , construction waste making sand ; mining crushing iron ore, quartz stone ; ceramic industry break raw materials ; metallurgical industry crushing coke , quicklime ; coking plant finely pulverized etc,  or at similar crushing occasions.
    Welding roller surface models suitable for feed size less than 150mm, finished size 3 - 30mm in crushing operations. It can be used in the pre-crushing of cement clinker in cement industry , limestone and composites; CWS industry pre- crushing coal; iron ore industry pre-crushing slag , iron ore, silicon ore; brick factories crushing all kinds of ore to make unburned brick ; power plant crushing coal; or at similar crushing occasions .
Feature
--.Compact structure, reliable performance
--.Low noise and high efficiency
--.Easy to install and only need simple foundation
--.It can adjust the pressure and size easily, and can be made to meet the customer's request 
--.Self-protection, the parts can not be damaged when hard materials such as the metals goes into the crushing cavity
--.Low attrition rate and easy to maintain

 Overall Dimension Drawing

Technical Parameters

NO.	Model	Feeding size  (mm)	Output size     (mm)	Capacity  (t/h)	Driving Power (kw)		Protcetion mode	Driving
					Standard	Heavy type
1	2PG0202PT	<10	0.5-5	0.5-10	2.2x2	3x2	Spring or hydraulic  triangular belt or  coupling	Triangular belt or  coupling
2	2PG0404PT	<30	0.5-10	3-30	4x2	5.5x2
3	2PG0605PT	<40	0.5-20	6-50	11x2	15x2
4	2PG0806PT	<60	0.5-20	10-100	15x2	18.5x2
5	2PG1008PT(Y)	<80	0.5-30	15-130	22x2	30x2
6	2PG1208PT(Y)	<90	0.5-40	30-250	30x2	37x2
7	2PG1212PT(Y)	<90	0.5-40	40-350	45x2	55x2
8	2PG1612PT(Y)	<110	0.5-50	60-420	55x2	75x2
9	2PG1616PT(Y)	<110	0.5-50	75-550	90x2	110x2
10	2PG1816PT(Y)	<130	0.5-50	90-700	110x2	132x2

Application Site

Make A Delivery



FAQ
Q: Are you a factory ? 
A:Yes,we are factory, which was established in 2006.
We focus on providing expert service including design, manufacture, installation & maintenance for the logistic industries & warehouse equipment.
Q: Terms of Payment:
A:30% of the total amount by TT as deposit, the balance to be paid by TT or L/C at sight before the machines leaving seller' factory.
100% irrevocable L/C at sight.
 Q:Time for preparation of goods:
A:The above machines shall be ready for delivery during 45 days from the date of receiving the deposit/LC, excluding the time of waiting for shipment. If there is any delay of delivery caused by seller, 3‰ of the total amount shall be paid to buyer each day, but this amount shall not exceed the amount of deposit; if the delay is caused by buyer, 3‰ of the total amount shall be paid to seller each day, but this amount shall not exceed 10% of total value of machines.       
 Q:Guarantee period:
   A:The guarantee period for the above machines is twelve months from the date of putting into use, but not exceeds twenty-four months after the machines leaving seller's factory. It is not applicable for quick wear parts.
Q: May I know the status of my order?
A: Yes. We will send you information and photos at different production stage of your order. Every step will be send to you in time.
Q: Can I customize shelving or racking at my own size?
  A: Sure.
Q: If i need the complete mineral processing line. is Baite able to help us build it?

A: Yes, we can help you combine a complete mineral processing line. and give you related professional advice as long as you need.
There is a rich experience engineer team of us. we had already build many mining projects in China & Overseas. You can believe our quality and service. 

Why Choose us?
1.Pre-sale services: enthusiasm
We provide you with the prophase plan, process flow design and manufacturer equipment according to your special demand.
2.one-year warranty to make sure your machine runs consistently.
We always offering lifelong services and provide spare parts for a long term,and repair main parts under right using for free in two years.
3.Technical services
3.1 Design of production line and solutions according to buyer's requirement.
3.2 In 7 days after the receipt of deposit, the seller shall provide related technical documents for equipment installation, in addition to those with special requirements.
3.3 Before delivery, the seller can modify the previous solutions according to buyer's requirement.   
4.After-sales service
4.1 During the installation and commissioning, the seller shall send technician to the site for instruction of installation and commissioning, and for training of workers.
4.2 If there is any equipment failure caused by the buyer, the seller shall assist the maintenance of machines and replacement of fittings, and charges appropriate fees.
4.3 Beyond the guarantee period, the seller can provide services and fittings at a most preferential price. 
4.4The seller can provide consultation and inspection services freely for other products, especially for the up-stream and down-stream products of our equipment.