ISO Approved 20inch Cutter /Suction Pumping Dredger, Electric Dredger Made in China

• Customization: Available
• Type: Cutter Suction Dredger
• Power Type: Electric
• Model NO.: dredger
• Cyclone Type: Hydrocyclone
• Slot Type: CTS
• Customized: Customized
• Condition: New
• After-Sales Service: Technical Service
• Max. Dredging Depth: 16m
• Discharge Distance: 2000m
• Solid Sand Capacity: 1200m³/H
• Draught: 2.0m
• Displacement: 725t
• Transport Package: Steel Frame and Wood Carton
• Specification: carbon steel
• Trademark: Baite
• Origin: Shandong, China (Mainland)
• HS Code: 89019050
• Production Capacity: 50000pieces/Year

Product Description

Introduction
The JLCSD300 Cutter Suction Dredger of steel construction, the non self-propelled, dismountable type, is able to berth and dredge at any waters both in the coastal area and inland rivers, with similar conditions to that in navigation area "A" or below the "A"-line specified in code for inland river steel engineering ship manufacture of P.R.China.
The dredger can be used to excavate and transport cohesive sediment below the class specified in code for dredging engineering construction technique issued by Ministry of Water Resources(MWR) of P.R.China.
In the course of technical designing, we have considered special requirements for local tropical climate conditions such as meteorological and waters distributing state etc.
It's hull consists of a main pontoon and two side pontoons. is to be easy to dismantle or mount for transportation by road, rail or water, and is to be easy to reassemble at project site.The engines and dredge pump are located in the center pontoon,the 2 side pontoons serve as fuel bunkers,ballast tanks and store.
The dredger is powered by diesel engines. The main diesel engine is to drive the dredge pump, and in the free part of the engine, one set of power distributor is equipped, to supply power for all other equipments such as cutter, swing and ladder winches, and the spud rams etc.
The spacious control cabin is ergonomically designed  with 360 degree view. All the operation buttons, swifts, indicators, gauges are equipped on the control desk. Only two operators can control all the dredger in the operation room.
The dredger is painted by 4 layers of marine paint to protect from the corrosion. The ZINC anode can be used to give better anti-corrosion function.

Features
Functions of Dredger was cutter suction, digging, grabbing, piling, weeding etc. Its features are as follows:
1. Work stable, with spuds and support legs to keep balance;
2. High efficiency, with option submersible mud pump ensuring high slurry density (around 25%);
3. One person operation. Workers with excavator operation skills can operate easily 
4. Can be used in closed channel, river, lakes, sea, shallow areas, industrial pond, reservoir etc
5. Lights on dredger are available



Application
Cutter-suction dredger is widely used for the purpose of working in the sea of rivers and lakes, which can be used for dredging, dredging and filling. In special cases, the high power winch equipment is installed on the suction dredger, and the rock formations such as basalt and limestone can be excavated without blasting.




Technical Data

Ser	Description			Required Specification			Remarks
A	Make and Model			JLCSD300			ISO Certified Enterprise
B	Brand			JuLong			Registered Brand
C	Dredger Type			Full hydraulic			Cummins Engine
D	1.      Principle Dimensions
	(1)     Length Overall			31.5 m
	(2)     Breadth			5.4 m
	(3)     Depth			1.6 m
	(4)     Draft Loaded			1.0 m
	(5)     Dredging Depth			14.0 m
	(6)     Diameter of Suction Pipe			300 mm
	(7)     Diameter of Discharge Pipe			300 mm
	(8)     Discharge Distance			1000 m
	(9)     Water Flow			1200 m3/hr
	(10)    Total Installed Power			559 kw			Cummins Engine
	2.      Main Pontoon
	(1)     Length			11.5 m
	(2)     Width			2.2 m
	(3)     Depth			1.6 m
	(4)     Plate Thickness- Sides			6 mm		CCSB Steel Plate
	(5)     Plate Thickness- Front           & Rear Sides			12 mm, 12 mm		CCSB Steel Plate
	(6)     Plate Thickness- Deck			5 mm		CCSB Steel Plate
	(7)     Plate Thickness- Bottom			10 mm		CCSB Steel Plate
	3.      Side Pontoons
	(1)     Length			18 m
	(2)     Width			1.6 m
	(3)     Depth			1.6 m
	(4)     Plate Thickness- Sides			6 mm		CCSB Steel Plate
	(5)     Plate Thickness- Deck			5 mm		CCSB Steel Plate
	(6)     Plate Thickness- Bottom			8 mm		CCSB Steel Plate
	4.      Dredging Pump
	(1)     Make			Shijiazhuang Pump Group
	(2)     Model			12/10 G-G with Warman Technology		Gravel Dredging Pump
	(3)     Head			50-65 m
	(4)     Water Flow			1200 m3/hr
	5.      Main Engine
	(1)     Manufacturer			Cummins
	(2)     Model			KTA19
	(3)     Rated Power with RPM			559 KW @ 1800 RPM
	(4)     Amount			1 set
	6.       Gear Box
	(1)      Manufacturers			Zhejiang Xiaoshan
	(2)      Model			Marine Gearbox
	(3)      Amount			1 set
	7.       Cutter
	(1)      Type			Crown
	(2)      Wearing Parts on Cutting Edges			Replaceable Alloy Teeth
	(3)      Drive			Hydraulic Motor
	(4)      Diameter			1000 mm
	(5)      Cutter Shaft Power			60 kw
	(6)      Cutting Speed in RPM			0-40
	(7)      Amount of Blades Teeth			20 pieces
	(8)      Material			Alloy
	8.       Ladder Winch
	(1)      Line Pull - Second Layer	40 KN
	(2)      Line Speed - Second Layer	0-20 m/min
	(3)      Wire Size	Φ16 mm
	(4)      Drive	Hydraulic Motor
	9.       Swing Winch
	(1)      Line Pull - Second Layer	40 KN
	(2)      Line Speed - Second Layer	0-20 m/min
	(3)      Wire Size	Φ16mm
	(4)      Drive	Hydraulic Motor
	10.      Spuds
	(1)      Amount	2
	(2)      Dia.	377 mm
	(3)      Thickness	20 mm
	(4)      Length	15 m
(5)      Material	16 Mn
(6)      Drive	Hydraulic Ram
11.      Operating Cabin
(1)      Main Item	Siemens PLC Control Desk
(2)      Air Condition	1 set
(3)      Adjustable Chair	Leather , adjustable
(4)      Control Indicator and Lights	1 set
(5)      Operation Gauges	1 set
(6)      Suction Depth Indicator	1 set
12.      Hydraulic System
(1)      Description	Hydraulic system of proven design & reputed make to be used for operation of winches, cutter, spuds etc. All components are to be of proven design for trouble free operation. Hydraulic Pumps are "Vane Type" & driven through separate gear box fitted at free end of Engine.
13.      Fuel Oil Transfer Pump
(1)      Description	Electric motor driven pump is to be provided
14.      Tanks
(1)      Description	Fuel oil tanks, water ballast tanks, fresh water tank and dry tanks are to be provided.
15.      Anchors and Wire Ropes
(1)      Anchor Amount	2 Nos. @ 160kg
(2)      Description	Side winch wire (fitting): Minimum 100 m on each side. Necessary wires, gantry wires, spud slings, spud hoisting wires, mooring ropes etc. to be supplied and fitted with dredger.
16.      Painting
(1)      Description	Marine paint, four coats. Colors are to be approved by the Buyer.
17.      Auxiliary Generator
(1)      Description		Supplying Power for battery charging, fuel transfer pump, lighting, operation of one welding machine, air condition, bilge pump, etc.
(2)      Make & Model		Sunvim Marine Generator
(3)      Power		30 kw
(4)      Voltage		220/380v
	18.      Deck Generator Set
	(1)      Description		When in emergency condition, the deck generator will start to supply power.
	(2)      Make and Model		Weichai Huafeng
	(3)      Power		30 kw
	(4)      Voltage		220/380v
	19.   Lights
	(1)      Description		Deck Lights: 1 unit 500 watt IP 65 Halogen armature mounted on the ladder lift gantry 4 units 500 watt IP 65 Halogen armature mounted on the control cabin roof 2 units 500 watt IP 65 Halogen armature mounted on a light pole on the engine room Engine Room Lights: 8 units FL armature IP 562*20 watts divided over engine room area. Operating Cabin  Lights: 2 units FL armature IP 232×20 watts
	20.      Portable Bilge Pump
	(1)      Description		Used to be discharge dirty water in the bottom of pontoons. Driven by electricity
	21.      Signal Mast
	(1)      Description		Signal lamps required for navigation are to be provided.
	22.      Cathodic Protection
	(1)      Description				Sufficient amount of anodes to be placed on under water hull and ladder for a period of 2 years in salt water.
	23.      Safety Equipment
	(1)      Description				Life jackets, life buoys, fire extinguishers (4 sets) to be provided

Company & Customer Visiting
There is no better , only better.
Weifang baite Magnet Technology Co., Ltd . is a modern joint-stock enterprise, which is producing magnetic and power equipment .The service is related to more than 10 areas ,such as electricity , coal ,building materials, metallurgy ,ports ,mining ,nonferrous metals ,power environmental production .At present ,we  have provided more than 3000 domestic customers with reliable and value-added and convenient professional equipment and programes, and at the same time ,we occupy more than 60%magnetic separation equipmemt matching share of China ball mill, crusher, iron sand ship and other production industry, Baite has firmly implemented IS09001:2000 international quality magnagement system standard and IS010012 international quality inspection system standard.


Factory Advantages & Service
Baitemagnet factory for general users and special users design and production of various types of customized products.The company owns 3, 000 square meters of mine machinery production plant in linqu area of weifang, and each product has a separate workshop to assemble specialized production workers.Most of our products are self-developed products, combining with advanced technology at home and abroad to ensure that the industry is competitive and fully meets the technical requirements of customers.Our production capacity is strong, and we have a special production line for customers who are in urgent need of the goods.
We are full of enthusiasm, high quality service, think the customer value is the principle. Provide the spare parts and vulnerable parts of the products at the factory price.
Once the equipment failure in the process of production, the company within 24 hours to the customer's phone must come up with a clear solution, and to resume production first and then the responsibility attitude quickly solve the problem.
FAQ
1.Q: Can you provide samples?
A: Yes. We can make customized samples to you for quality checking and design confirmation.
2.Q: How long is the warrenty of your equipments? Does your company supply the spare parts?
A: The warranty period of Gelin equipments is one year. And of course we will supply the spare parts for you for life-long time at lowest cost.
3. How to make the payment? 
we accept the payment by T/T or Western Union or Cash, L/C .For T/T, the customer can choose 100% in advance or 30% in advance, and pay the 70% balance before shipment. 
4.Q: What is the shipping port?
A: Usually we ship from Qingdao port. If you want to ship from another port we can coordinate with you.
5.Q: What is the lead time?
A: 30-45 days after payment and production drawing confirmation.
6.Q: What is your MOQ?
A: Normally 1 piece is acceptable. Please consult with our sales for details.